Infi Futura Blood Pressure Monitor

Infi Futura Blood Pressure Monitor check the blood pressure during inflation only and does not need to wait for deflation. Inflation is a bit slower but it accurately measures the bp before hardly creating any pressure on the arm. It gives results immediately after inflation is complete. It is called measurement during inflation technology or comfort cuff smart read technology. The idea behind this is if you have to check the pressure in a soft tube and before measurement if you press the tube the pressure will change and results will be inaccurate. If you check pressure before pressing the tube the results will be accurate.

Uses:
It is used to checks the blood pressure during inflation and does not need to wait for deflation.

Product Specification and Features:

• Measurement method: Oscillometric

• Display: Liquid crystal digital display

• Measurement range: 0-280 mm/hg Pulse rate -20-255/min

• Accuracy: 4 mm/Hg

• Pulse: 5%

• Battery: 4×1.5V AA Alkaline batteries

• Dimensions: 163(W) X138(D) X62(h)mm2

• Weight: 400Gm without cuffs & batteries

• Cuff fits: 22 to 32 cm

Directions For Use:
Step 1: Insert the batteries

• Open the battery compartment of the BP Monitor in the direction of the arrow. Insert the 4 AA alkaline batteries in correct direction matching the polarities + –. Note The power supply is on, only when the LCD is flipped up. The battery symbol indicates that the battery is full. You will see the empty battery symbol if the batteries are depleted or empty. Note-It is important to tell you that batteries supplied along with the unit are alkaline batteries, not the ordinary pencil cell so. You are recommended to use Alkaline batteries only Example-Duracell.

Step 2: Connecting the cuff

• Insert the air connector knob firmly into the socket and push it until it is locked. Important- Relax and be comfortable sitting on a chair before taking a measurement. Wait for 30 minutes, If you have just smoked or taken some other tobacco product. Take out the cuff from the unit, unfold it and slip it over your arm. Either arm can be used to take blood pressure rather it is better to use the same arm every time for comparison. Wrap the cuff snugly over your arm with the help of this Velcro, so that it is neither too tight nor too loose. Keep the tube at the centre around 2-3 cms above the elbow. Note-Always Wrap the cuff directly on your skin any clothes under the cuff even a single cotton cloth will effect the accuracy of the monitor. Most important- Do not move your arm while measurement, Remain still and Quiet, do not speak, do not laugh, do not move the unit while measurement. It is not advisable to take the measurement while standing.

Step 3: Correct Position

• Keep your arm at the level of your heart and arm must be in the resting position
• Reconfirm that the cuff is wrapped over the elbow and tube is at the centre
• Whether you are sitting or in bed, your legs must not be crossed, if sitting must be flat towards floor

Step 4: How to start the measurement

• Press the start button to start inflation. Now the monitor will start inflating and you will feel the obvious pressure on your arm
• After reaching the appropriate level the unit will start deflating
• The heart symbol during measurement indicates that your Bp is being checked. This is your measurement

Step 5: How to analyze measurement

• 120 is the systolic blood pressure 78 is the diastolic blood pressure,80 is your pulse rate, This is the date and time of measurement M shows this is the memory and A shows this is the memory for patient A. Once you have taken the measurement do not take repeated measurement immediately. As your arm is under stress, let the arm relax 5 minutes and thereafter you can take the repeated measurement for comparison.

Safety Information:

• Read the label carefully before use

• Keep out of reach of the children

• Store in a cool dry place